The UAV Lab(RD10) RD10 another AQ50 Pro WIN!
Published: Sat Apr 14 2012
Just for fun, I decided to install the AQ50 in my most troublesome quad, the Dex quad, proving the problem was my mikrokopter electronics. I am beginning to think you can attache the AQ50 Pro to just about anything and fly it.
In short it flew amazing, considering that it was not configured, and the frame was just taped together with electrical tape. The electronics were not installed in any postive way, it was imbalanced. I took it outside and flew it in -15 with no time for adjusting to temperature, and I flew till my cold hands hurt. it flew perfect except for the occasional mico oscilation which I expected since one prop adapter was coming loos and one motor is a bit askew.
The FC is mounted on an old rev 7 plate
Once inside, the plate is sitting on tope the ESC and the Power Distribution harness and a bunch of peices of scrap foam I had littering the bench.
With just enough room to throw a battery in there....
here you can see how imbalanced everything is:
