The Clone

Published: Sun Apr 01 2012

RD2 was the first MUAV built by WWVi - RD2 had a total failure during the first offical test flight and was destroyed. The fault was traced back to poor QC - cold solder joints on the ESC caused a failure during flight causing the ESC to overheat and the solder to go molten. This copter was a kit purchased from foxtech. we have not purchased again from them.

Air Frame: Sigma Terminator

Motor to Motor Distance:

All Up Weight:

Platform Format: Quadcopter +

Flight Controller:

Gyros: Analog Devices ADXRS610

Accelerometer: STMicroelectronics LIS344ALH - MK

Magnetometer: None Installed At This Time

Barometric Altimiter: Freescale Semiconductor MPX4115A - MK

GPS Module: None Installed At This Time

Ultrasonic Ranger: None Installed At This Time

Lipo Power: Flightmax 4S 30C 2450 mAh Lipo

Motor Controller: FoxTechFPV MK Clone ESC 1.3

Brushless Motors:

Propellers: GWS 9050x3 Counter Rotating Sets

Radio System: Futaba 9C Super - DM8 (Spektrum)

PPM Adapter: FoxTechFPV MK Clone PPM adapter

Receiver Module: Spektrum AR7000 RX